Free Hosting  


Back To Previous Page


The Jeep's Special Parts:

In the process of putting the Jeep together, most parts were purchased used, but a few of the parts were purchased brand new from a (shiver) dealer or a parts store. Since anything from a dealer or parts store has a part number associated with it (and that number can be really hard to research if you don't know all the details of a vehicle that the part came off of), I'm listing these parts and their part numbers here as a reference.

You'll find two charts here; the first is of the parts I purchased new, and the second is the part numbers for things I've purchased used, or those that I will be purchasing.

Please be aware that the prices that I paid may not be the same as those that the dealer or parts store in your area quotes you, and that the places that I went to may very well have changed their prices since the time I made my purchases.

Note: These tables will be updated periodically, as I haven't identified/purchased everything I need yet.

Part Vehicle Designed For Part Number Where From Cost
Front Shock Towers 1986-1988 Ford F-250/F-350 E5TZ-18183-A Baillargeon Ford, Richardson, Texas $13.02 each
Hub/Race/Brake Disk/Lug Bolt Assembly 1976-1996 Ford F-100/F-150/Bronco Raybestos 66192 Centerline Auto Parts, Puyallup, Washington $120 each
Inner Wheel Bearing 1976-1996 Ford F-100/F-150/Bronco Federal Mogul LM603049 Centerline Auto Parts, Puyallup, Washington $14.35 each
Outer Wheel Bearing 1976-1996 Ford F-100/F-150/Bronco Federal Mogul LM501349 Centerline Auto Parts, Puyallup, Washington $14.17
Hub Inner Seal 1976-1996 Ford F-100/F-150/Bronco National Seal 4250 Centerline Auto Parts, Puyallup, Washington $6.22 each
Spindle Nut Kit (most anything with a front Dana 44) Dorman 616-030 Centerline Auto Parts, Puyallup, Washington $17.76 each
Spring Perch Set (generic, for a 3" axle tube and 2-1/2" wide springs) Moroso 85090 Billy Bob's Offroad, Puyallup, Washington $20/pair



Part Vehicle Designed For Part Number
Hydralic Clutch-type Bellhousing 1984-1996 Ford F-250 E4TZ-7505C
Clutch Slave Cylinder (for above) 1984-1996 Ford F-250 E4TZ-7A564A
Clutch Slave Cylinder Bracket (for above) 1984-1996 Ford F-250 E4TZ-7A544A
Clutch Release Lever (for above bellhousing) 1984-1996 Ford F-250 E4TZ-7515C
Clutch Release Lever Dust Boot (for above bellhousing) 1984-1996 Ford F-250 E4TZ-7513A
Dust Cover (for above bellhousing) 1984-1996 Ford F-250 E4TZ-7007A
Clutch Throw-out Bearing (for above bellhousing) 1984-1996 Ford F-250 N1714
Ford Windsor Engine Mounts (rubber pads) (various, but truck 1984-1996 listed here) E4TZ-6038G



(To go back a page, click here.)